Siya Habitats · An IFEM Group Enterprise

Your fire system reports for duty.
Every 60 seconds.

Fire Watch Pro is a continuous fire-safety monitoring platform: an industrial IoT gateway wired into your fire panel and pump room, a cloud that never blinks, and audit-grade compliance evidence on demand.

Book a demo See the story
0ACMS parameters watched
stelemetry heartbeat
0events in on-board black box
%uptime target
24×7monitoring & escalation
Scroll to explore
22:00 · Baseline

This is your building.

Every fire system inside it, on one live map. Set once against your approved NOC baseline.

High-rise · Mall · Plant

Any building. Same twenty parameters.

Tower, shopping mall or manufacturing plant. The pump room, the tanks and the panel are the same story everywhere.

Detection · 4 of 20

The panel cannot hide a fault.

Panel, repeater, battery and every manual call point, read straight off the fire panel.

Pumps · 13 of 20

Five pumps, watched shaft by shaft.

Run status on every pump, power at the MCC, pressure on both risers.

Reserves · 16 of 20

An empty tank is a dead system.

Ultrasonic sensors on both fire tanks. A level sensor in the diesel tank.

Air & PA · 20 of 20

The systems that keep exits alive.

Pressurisation and smoke-extract fans, plus the PA system. All 20 mandated parameters, live.

The gateway

One box reads them all.

Panel, pumps and tanks feed one industrial gateway. Cloud-checked every 60 seconds.

03:12 · Fault

The jockey pump trips.

Riser pressure falls while the city sleeps. One window lights up: the facility manager's. The calls have already started.

07:00 · Proof

Fixed by dawn. On record forever.

Pump restored. Ticket closed. The whole night in the audit log, ready for any insurer.

Keep scrolling
The problem

Fire systems fail silently.
Inspections happen quarterly.

Between two manual inspections, a pump can trip, a tank can drain, a detector can be unplugged for renovation and never reconnected. Nobody knows until the day it matters most.

90+

days between checks

Interval-based inspection means months of blind spots. A register entry proves someone visited, not that the system works.

0

warning when pumps die

A jockey pump that stops holding pressure, or a diesel pump with a flat battery, looks perfectly normal until a hydrant is opened in an emergency.

1st

question insurers ask

“Can you prove your fire system was operational?” After an incident, paper registers convince no one: not insurers, not authorities, not courts.

Fire Watch Pro replaces the quarterly photograph
with a live feed.

The mandate

Maharashtra has made continuous monitoring the law.

The Government of Maharashtra's Automated Continuous Monitoring System (ACMS) notification under the Fire Act requires buildings to connect their fire-safety installations to a system that watches them round the clock and reports faults automatically. Fire Watch Pro was engineered line-by-line against that gazette.

  • Real-time telemetry: MQTTS data from the gateway to the cloud every minute
  • Always connected: 4G / 5G, Ethernet or Wi-Fi, whichever is reliable on site
  • No-data alarm: the cloud raises an alarm if nothing arrives for 15 minutes
  • 7-hour backup: gateway UPS keeps watching through power cuts
  • 10,000 event logs: stored on the gateway, timestamped by a real-time clock
  • Cloud retention: events retained with a 99% uptime target
  • Reports on demand: data and alarm reports straight from the portal
  • Real-time alerts: SMS and email the moment a fault occurs
  • Digital records: full record-keeping of operations and maintenance
  • Fire-service ready: API to push critical alarms to emergency services
The platform

One platform. Three lines of defence.

Detection, protection and extinguishers: the fire-safety trinity, verified continuously and driven to closure through ticketing and escalation.

A

Fire Detection Monitoring

  • Multi-brand fire alarm panel compatibility
  • Per-device and per-loop health, every heartbeat
  • Removed or dead detector flagged within minutes
  • Offline buffering, so no data is lost in network drops
B

Hydrant & Pump Monitoring

  • Pipeline pressure, flow, water & diesel levels
  • Pump start-sequence verified on schedule
  • Dry-run and fail-to-start raise critical faults
  • Test events distinguished from real emergencies
C

Extinguisher Monitoring

  • Low-power asset tags with multi-year battery
  • Removal or low pressure flagged in real time
  • QR-paired digital identity for every unit
  • Expiry & AMC alerts before they lapse
How it works

From installation to iron-clad evidence.

1

Day oneConnect

Our gateway wires into your existing fire alarm panel and pump-room MCC. Read-only on the panel, warranty-safe on the MCC. No rip-and-replace, no downtime.

2

CommissioningBaseline

Every detector, loop, pump and tank is recorded against your approved NOC configuration. That baseline becomes the immutable truth the platform defends.

3

Around the clockMonitor

Telemetry lands in the cloud every 60 seconds. Any deviation from baseline, whether a silent detector, a falling tank or a pressure leak, is caught within minutes, not months.

4

On deviationAlert & escalate

Every fault opens a ticket. SMS, email and voice calls climb your escalation matrix until a human confirms restoration. In a real fire, responders instantly get zone, drawing, address and GPS.

5

On demandProve

Audit-grade readiness reports for insurers, authorities and management, generated from immutable logs, not handwriting.

The hardware

An industrial gateway built for pump rooms,
not server rooms.

RISC MCURELAYSRS485SMPS4G MODULESD · RTCOPTO DILi-ion UPSFIRE WATCH PRO1RS485 · Modbus RTU master2Opto-isolated inputs · MCC3Relay outputs · pump starters44G module · MQTTS5SD black box · 10,000 events · RTC67-hour Li-ion battery UPS7PT100 / NTC temp inputs8IP-rated steel enclosure
1Modbus RTU master · RS485Reads any RS485-capable fire panel, device by device, loop by loop
2Opto-isolated inputsGalvanically isolated digital inputs from the MCC aux contacts
3Relay outputsPump control through isolated relays, never through the fire logic
44G module · LTEEncrypted MQTTS/HTTPS uplink; no-data alarm within 15 minutes
510,000-event black boxOn-board SD logging with a real-time clock, survives network loss
67-hour battery UPSKeeps watching through power failures, exactly when fire risk peaks
7PT100 / NTC inputsPipeline temperatures and genset battery health
8IP-rated steel enclosureBuilt for pump rooms, designed and made in India
Designed and manufactured in India on a controller platform already proven in industrial deployments across the country.

The complete monitoring specification

Every parameter we watch, and the sensor that watches it. This is the full scope of the Maharashtra ACMS mandate, covered point by point.

01Main hydrant pump run statusWater differential pressure switch
02Main sprinkler pump run statusWater differential pressure switch
03Standby diesel / electric pumpWater differential pressure switch
04Jockey pump run statusWater differential pressure switch
05Booster pump run statusWater differential pressure switch
06Power to main hydrant pumpVoltage sensor at the MCC
07Power to main sprinkler pumpVoltage sensor at the MCC
08Hydrant riser low pressurePressure switch / transmitter
09Sprinkler riser low pressure (under 5 bar)Pressure switch / transmitter
10Diesel tank levelLevel sensor
11UG / AG fire tank low levelUltrasonic water-level device
12Overhead tank low levelUltrasonic water-level device
13Detection operation statusFree contacts from the fire panel
14Control / repeater panel statusFree contacts from the fire panel
15Panel battery statusFree contacts from the fire panel
16Manual call points statusFree contacts from the fire panel
17Public address system statusFault status from the PA panel
18Staircase pressurisation fanAir differential pressure switch
19Lift-lobby / hoistway fanAir differential pressure switch
20Basement supply & exhaust fansAir differential pressure switch
The command centre

Don't take our word for it.
This is the live product.

Below is our interactive demo: a full building simulation covering all 20 ACMS parameters. Trip a pump. Cut the mains. Drain a tank. Watch Fire Watch Pro catch every one of them.

siya-dashboard.pages.dev/demo
Load the interactive demo Full building simulation · pumps, tanks, fans, fire alarm · all 20 ACMS parameters
Launch the interactive demo ↗ See a live site feed ↗
Proven platform

The controller inside Fire Watch Pro
already works where failure isn't an option.

ITC Hotels JW Marriott Phoenix Marketcity NTPC Nexus Malls + industrial & municipal sites

10+ field deployments of the underlying industrial controller platform across hospitality, retail and power-sector sites in India.

Get started

Know your building is ready.
Prove it on demand.

Book a walkthrough of Fire Watch Pro for your building, society or portfolio. We'll map your existing fire panel and pump room, and show you exactly what continuous compliance looks like.

Book a demo Try the demo first